By starting with only the best raw materials and manufacturing processes, BSI produces the highest performing adhesives, with top-notch technical support. By selling direct to retailers, BSI adds the critical factor of having dealers stocking fresh products. BSI’s adhesives never sit in a warehouse under uncontrolled conditions. This results in an unmatched shelf life and consistent performance, which a growing number of hardware retailers are taking advantage of.
Showing all 9 results
-
BSI112 Maxi-Cure Extra Thick CA Glue 1 oz.
$6.991 oz. (29.5ml)plastic bottle. MAXI-CURE™ extra thick CA is the best CA for most plastics, including GE’s Lexan. MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife
-
BSI151 Insta-Set CA Accelerator 2 oz.
$6.992 oz. (59ml) bottle INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed
-
BSI107 Insta-Cure+ Gap Filling CA Glue 1 oz.
$6.991 oz. (29.5ml) of INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close
-
BS111 Maxi-Cure Extra Thick CA Glue 1/2 oz.
$4.991/2 oz. (14.7ml). MAXI-CURE™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling
-
BSI106 Insta-Cure+ Gap Filling CA Glue 1/2 oz.
$4.991/2 oz (14.7ml) size. INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with
-
BSI161 Un-Cure CA Debonder 1 oz.
$3.991 oz. (29.5ml) bottle. UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then